home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
SuperHack
/
SuperHack CD.bin
/
ANARCHY
/
FILE60.TXT
< prev
next >
Wrap
Text File
|
1996-04-22
|
12KB
|
325 lines
The Art of making M-80 and M-100s
--------------------------------------
By Anonymous Caller...
Written for The K.C. Hack Shack
913-432-4495
This is for educational use only. Some of these formulas are VERY dangerous!
FLASH POWDER
------------
Flash powder is a chemical mixture that burns so fast that it appears to
burn instantly, producing a bright flash of light.
Flash powder will produce an extremely loud explosion in amounts larger than
4 ounces even when it is not contained Very small amounts of flash powder
will produce a very loud explosion when contained, even in a container made of
a few layers of paper.
Flash powder is usually made from a very fine powdered metal that will burn
and an oxidizer. Powdered aluminum is used the most because it is cheaper.
Powdered magnesium and zinc will also work. The oxidizer can be Barium
Nitrate, Ammonium Perchlorate, Barium Peroxide, Strontium Nitrate, Potassium
Chlorate, Potassium Perchlorate, Sodium Chlorate, Potassium Permanganate,
others, and any combination of these.
All the Chlorate are friction and impact sensitive, and also the Perman-
ganate. Potassium Perchlorate is the least sensitive of the Chlorates.
All the chemicals should be crushed into a very fine powder, about 400 Mesh
or smaller. 400 Mesh is about like kitchen type flour.
Black German Aluminum is a brand name for aluminum powder. It has a partical
size of 600 Mesh for 98% of the aluminum material. The other 2% of the
material is larger than 600 Mesh.
There are other aluminum powders made by other companies that are equal to
or better than Black German Aluminum.
Aluminum Pyro Powder is also a brand name. The partical size is (98%-400)
or 98% of the material is smaller than 400 Mesh. The other 2% is larger than
400 Mesh.
FLASH POWDER FORMULAS
---------------------
1. This formula is one of the best. It produces a very, very, extremely
loud explosion. Easy to ignite with a fuse. It is not moisture absorbent.
Not very sensitive to impact or friction. Sodium Chlorate or Potassium
Chlorate can be used instead of Potassium Perchlorate but it then
becomes very sensitive to friction and impact. 4 ounces of this mixture will
produce an explosion equal to one stick of dynamite!
Potassium Perchlorate 2 oz.
Aluminum Powder 600 Mesh 1 oz.
2. This formula produces and extremely loud explosion, almost as good as
formula #1. This is what most fire-crackers, M-80's and other fireworks
are made with.
Potassium Perchlorate 2 oz.
Aluminum Powder 400 Mesh 1 oz.
3. This formula is equal to formula #2 It is not sensitive to friction or
impact.
Barium Peroxide 9 oz.
50%/50% Magnesium aluminum
powder 200 Mesh 1 oz.
4. This formula works as good as formula #2 but it produces a very
bright flash. This formula is what use to be used for the photo flash for the
old box type cameras about 100 years ago
Barium Nitrate 3 oz.
Potassium Perchlorate 3 oz.
Aluminum Powder 400 Mesh 4 oz.
5. This formula works very good. It is not very impact or friction
Sensitive. It produces a very, very loud explosion. Potassium Perchlorate
contains 46.1914% oxygen. Half as powerful as #2.
Potassium Perchlorate 2 oz.
Sulfur 1 oz.
Aluminum Powder 400 Mesh 1 oz.
6. This formula works as good as #5 but it has a disadvantage of being
moisture absorbent and it is very impact and friction sensitive. Sodium
Chlorate contains 45.0937% oxygen.
Produces a very, very loud explosion. Equal to #5.
Sodium Chlorate 2 oz.
Sulfur 1 oz.
Aluminum Powder 400 Mesh 1 oz.
7. This formula is very dangerous because it is very sensitive to
friction and impact and could explode during the construction of any
explosive device. Potassium Chlorate contains 39.1664% oxygen. This formula
produces and explosion almost equal to #5 or #6. Used in the manufacture of
toy cap pistol caps.
Potassium Chlorate 2 oz.
Sulfur 1 oz.
Aluminum Powder 1 oz.
8. This formula is very, very very sensitive to impact, friction and
static electricity, even more sensitive than #7. Extremely dangerous! Will
ignite even when wet.
Potassium Chlorate 6.7 oz.
Red Phosphorus 2.7 oz.
Sulfur 0.3 oz.
Calcium Carbonate 0.3 oz.
9. This formula has slightly less explosive power than #7. It is
slightly friction and impact sensitive. Potassium Permanganate contains
40.4961% oxygen. This formula will ignite itself if it gets wet. Very loud
explosion.
Potassium Permanganate 2 oz.
Sulfur 1 oz.
Aluminum Powder 1 oz.
10. This formula produces a very small explosion when ignited in a paper
tube. A much louder explosion is produced when it is ignited in a very
strong container. It is impact and friction sensitive.
Potassium Chlorate 7.5 oz.
Charcoal dust 1.5 oz.
Sulfur 1.0 oz.
11. No information is available about this formula.
Potassium Chlorate 6 oz.
Antimony Sulfide 3 oz.
Sulfur 1 oz.
12. This formula is a little louder than formula #10. Impact and
friction sensitive. Produces a small explosion in a paper container.
Sodium Chlorate 7.5 oz.
Charcoal dust 1.5 oz.
Sulfur 1.0 oz.
13. No information is available about this formula.
Potassium Chlorate 7.5 oz.
Gallic acid 2.2 oz.
Red gum 0.3 oz.
!CAUTION!
---------
The mixture of any chlorate with phosphorus or sulfur is extremely
sensitive to friction and percussion and explodes with great violence.
Chlorate explosives must not be stored together with ammonium nitrate
explosives, since ammonium chlorate which is formed when these two
substances are brought in contact, explodes.
When mixing chlorate explosives, crush all of the chemicals separately. Sift
the oxidizer through a piece of screen wire to break up the material into
small pieces. Then sift the other chemicals also if they need it.
Mix all of the flash powder chemicals together and mix well by sifting them
through a piece of screen wire or by shaking them in a ZIP LOCK bag. This
mixture is very sensitive to friction, impact, heat, spark, static electricity
4 ounces of flash powder has the same explosive power as one stick of
dynamite. One gross of M-80 fire-crackers is equal to 3 sticks of dynamite.
8 ounces of flash powder will make 100
M-80 type firecrackers if each M-80
contains 1/2 teaspoon of flash powder.
M-80's with 1/4 teaspoon of flash powder produces an explosion that sound
almost exactly the same as M-80's with 1/2 teaspoon of flash powder, but it
has less destructive power.
24 ounces of flash powder will make 100 M-100 type firecrackers. (And
these are awsome!)
Quick Conversions:
3 teaspons = 1 tablespoon
4 tablespoons = 1/4 cup
1/4 cup = 2 oz.
M-80 & M-100 CONSTRUCTION
-------------------------
1. PLUG ONE END OF THE PAPER TUBE.
Run a small amount of Elmer's glue around the side of an end plug or the
inside edge of the paper tube. Insert the end plug, convex side first, into
the paper tube. Push it in until the back edge of the plug is flush with
the edge of the paper tube.
2. FUSE THE PAPER TUBE.
Using a 1/8 inch drill bit, an ice pick or a sharp nail, punch a hole
through one side of the paper tube in the middle. NEVER puncture a case that
contains flash powder. The paper tube should always be fused before the
flash powder is added. Cut the fuse to 1 1/2 inches in length and insert it
into the hole at least halfway across the inside diameter of the paper tube.
Run a small amount of Elmer's glue around the fuse and let it dry.
3. MIXING THE FLASH POWDER
Extreme caution should be used when mixing flash powder. Flash powder is
extremely dangerous and explodes with great force. Avoid all sources of
friction, impact, flame, sparks and static electricity.
4. FILL THE PAPER TUBES
Stand the paper tubes on end, open end up. Using a small funnel and a
measuring spoon 1/2 teaspoon, fill the paper tubes 1/2 to 2/3 full. Do not
fill the tubes completely full or pack in the flash powder. By leaving an air
space there is room for the flash powder to expand when ignited which
will produce a much louder explosion.
5. INSERT THE FINAL END PLUG
Plug the open end in the same way that you plugged the first end.
MATERIALS NEEDED FOR ONE M-80
-----------------------------
1. One paper tube, 1/2 inch inside diameter, 1/16 inch wall thickness,
1 1/2 inches long.
2. Two paper end plugs 1/2 inch outside diameter, 1/16 inch paper thickness.
3. One 3/32 diameter water proof fuse about 1 1/2 inches long.
4. 1/2 teaspoon of flash powder.
5. 10 drops of Elmer's glue.
__ ___________ __
end | o | end
plug __| ___________ |__ plug
fuse ^ hole
|
______|_____
|M80 or M100 |
|____________|
MATERIALS NEED FOR ONE M-100
----------------------------
1. One paper tube, 5/8 inch inside diameter, 1 3/4 inch long
2. Two paper end plugs 5/8 inch outside diameter.
3. One water proof fuse about 1 1/2 inches long.
4. 1 1/2 teaspoons of flash powder.
5. 10 drops of Elmer's glue
CHEMICALS
---------
Most of the chemicals you need are sold at K-mart, hardware stores, drug
stores, lumber yards, plumbing supply, Wall-mart, cement company and many
other stores.
Sodium Chlorate. O2 solid oxygen pellets are used in small work shop torches.
Potassium Nitrate. Sold by most drug stores in 4 ounce bottles. Also sold
by farmers co-op supply stores.
Sulfur. Sold by farmers co-op, drug stores and lawn and garden centers.
Aluminum Powder. Sold by paint stores and auto parts stores. Aluminum powder
can be found in radiator stop leak.
Sodium Nitrate. Sold by drug stores and meat packing plants.
Antimony Sulfide. Is sold by most plumbing supply stores.
Potassium Permanganate. It is used for water treatment. Check you phone
book for water treatment equipment and supplies.
Ammonium Nitrate. Can be bought from any farmers co-op or lawn and garden
center.
Red Phosphorus. The white tip on wooden kitchen matches contains red phosphorus
Check your phone book yellow pages for industrial chemical supplies, they will
usually have most of these chemicals.
When you call, tell them you are with a beginning rock band and want it for
some special effects on stage. They will fall for that every time...
Now you probably wonder where you can get the paper tubes and end caps. Ok
just write:
FULL AUTO CO. INC.
P.O. Box 1881
Murfreesboro, TN. 37133
And ask for a catalog. M-80 size tubes are 100-$5. End plugs are 200-$3.5
M-100 size tubes are 100-$9. End plugs are 200-$5. You must have an order
form to order this. They also sell all the chemicals you need to make
flash powder. You must be over 21 or at least sign the order that
says that you are 21. There is no way that they can find out. I DO NOT
suggest that you buy their water proof fuse because it sucks! Go to a gun
shop in your area and ask for cannon fuse. It's probably around 35 to 40
cents a foot and is water proof and MUCH better quality. You do have to
be 16 or 18 to buy it.
Hope you enjoyed this file. There will be many more to come, so give us a
call at 913-432-4495. K.C. Hack Shack My next file will be on the art of
making CO2 bombs. Later,
From: Anonymous Caller...